ABS Vortex-X Aqua High Performance Gaming PC - Intel i9 13900K - GeForce RTX 4080 - VAX139K4080FE

Search Our Support Content

Reseat your graphics card

1.Turn off your PC.
2.Unplug your PC from mains power, as well as any peripheral devices.
3.Lay your PC down on its back.
4.Unscrew the thumb screws at the rear of the case.
5.Remove the side panel from your case.
6.Locate your video card.
7.Unplug the PSU cable from the top of your video card by pushing down on the clip and pulling it away.
8.Locate the screws attaching your graphics card to your case.
9.While holding it secure, unscrew it from the rear of the case.
10.Locate the clip on the PCIe slot that the graphics card is sat in.
11.Press down on the clip, still holding the card, and pull the card away from the motherboard.
12.Check the video card for damage.
13.Reseat it by pressing the card back into the PCIe slot until you hear or feel a click.
14.Re-screw your card to the back of the case.
15.Plug the PSU cable back into your graphics card.
16.Place the side panel back onto your PC, and reattach the thumb screws.
17.Plug the power supply cables back in. Make sure you take care to plug the cable back in securely.